About 7-inch Solar Magnetic Backup Camera System

If you have a hard time judging whether you are in fully inside your garage. If you don't want to pay thousands of dollars to have your console upgraded and a backup camera installed. Look no further than the BSC701/BSM701/BSC702 7-inch Solar Magnetic Backup Camera Systems. This innovative device is designed to provide you with a clear view of your surroundings, making parking and driving safer and more convenient. In this blog post, we will explore the features of this cutting-edge backup camera system.

Q: What are the monnitor dimentions?

A: 7.28(L)x  4.53(H)x 1.5(D)

Q: Is monitor also battery powered?

A: No, the display is wired for power.

Q: Can the screen  be powered by USB-C?

A: No, You can either hardwire it or use the enclosed cigarette power source
(If your vehicle only has a Type-C or USB out, you can add a Type-C to DC Power cord or a USB to DC Power Cord).

Q: Does the dashboard Monitor have to be plugged into a cigarette lighter?My vehicle do not has a 12v accessory plug.

A: Package comes with cigarette lighter 12V plug and DC power cord. If your vihicle do not have a 12v power port (cigarette lighter port), it can be hard wire for power.
Hardwired method: The red wire is connected to the car ACC, and the black wire is connected to the ground wire.

Q: How can I do if I do not have smooth areas to affix a suction cup?

A: You can use sticky adhesive or VHB 3M adhesive double-sided circle to help it mount.
Or put a small piece of sturdy velcro on the bottom of suction cup and on your dash.

Q: What are the camera dimentions?

A: Solar Panel Size 3.8(L)  x  2.36(H)  x  0.19(D)
Camera Dimensions 4.29(L)  x  3.27(H)  x  2.9(D)

 

Q: Can this solar system be used with non-solar wireless cameras?

A: No, they are not competible.

Q: How do I pair multiple cameras?

A: The pairing process for the 4 cameras is as follows
Turn off all cameras and make sure they are charged with at least 1 bar
1. Press SEL to switch to the channel 1 (CAM1).
2. Start the pairing function: Menu>PAIRING>20-second countdown
3.Turn on ONE camera DURING the pairing countdown
4. Press SEL to switch to the channel 2 (CAM2).
5. Start the pairing function again for a 2nd time:Menu>PAIRING>20-second countdown
6. Turn on the 2ND camera DURING the pairing countdown
7. Press SEL to switch to the channel 3 (CAM3).
8. Start the pairing function again for a 3rd time:Menu>PAIRING>20-second countdown
9. Turn on the 3rd camera DURING the pairing countdown
10. Press SEL to switch to the channel 4 (CAM4).
11. Start the pairing function again for a 4th time:Menu>PAIRING>20-second countdown
12. Turn on the 4th camera DURING the pairing countdown

Special Notice

  • Pair each individual camera individually. During the pairing process,other cameras should be power off to prevent signal interference.
  • Please make sure the channel (CAM1/2/3/4) you want to pair with the camera has been turned on via Menu "Cam-Setup"
  • If no picture displayed after pairing, please power-off again thecamera and retry pairing steps.
  • The pairing must be completed within 20 seconds, otherwise, you need to retry pairing steps.
  • If the camera is powered on all the time during the pairing process, there is no picture displayed as well.

Q: Why is there no option to show 4 cameras at once?

A: You may have turned off one or more channels, If you would like all 4 cameras shows at the same, please turn on all channels and select quad split or H split mode.

Q: How to turn on/off the channels?

A: Menu>CAM-SETUP>CAM1/CAM2/CAM3/CAM4ON/OFF

Q: How can I turn off the camera?

A: Push the power button on the camera.

Q: Why are the indicator lights still blinking when the camera is turned off?

A: The lights will continue to flash as long as there is sun light. Cover the solar panel and the lights only come on when the camera is on. The lights will show the status of the battery charge.

Q: Why solar charging isn't fast enough?

The size of the camera solar panel is designed to be small for ease of installation, but the camera's built-in battery is large. Charging a large battery with a small solar panel will have a low charge rate.
So the camera cannot fully rely on solar charging, and solar energy can only extend the working time of the camera. There is a type-c port on the back of the camera that will allow you to charge the internal battery with a alternative power source. It is necessary to charge with a charger regularly.

Note: To save energy and hold charges much better it is best to turn it off when you are not using it.

Q: How to Restore Default Settings?

A: Menu>SYSTEM>DefaultON

Q: Can I rotate an image 90 degrees?

A: No, the image can only be rotated 180 degrees.

Q: How to start/stop recording?

A: Press and hold the + button for 5S or MENU >RECORD>ON/OFF

Q: How to do if the screen is upside down?

A: Press and hold the + button for 5S (If you are on the Menu page, press M to return to the camera view before performing this operation.)

Q: Why can't I operate the M button?

A: In split-screen or recording, the M button will be locked and cannot be operated, you need to switch to single-screen mode and stop recording in order to operate.

Q: Meaning of the Battery Level Indicator.

Q: Can I make the battery indicator light go off while using it?

A: No, The camera's indicator light comes on when the camera is on and goes off when the camera is off and the solar panel is covered.

 

What is the 7-inch Solar Magnetic Backup Camera System?

A: The 7-inch Solar Magnetic Backup Camera System is a state-of-the-art device that uses solar power to operate. It consists of a 7-inch LCD monitor and a magnetic camera that can be easily attached to the rear of your vehicle. The camera wirelessly transmits real-time video footage to the monitor, allowing you to see what's behind you without turning your head.

How does it work?

A: The camera is equipped with high-quality image sensors and infrared LEDs, ensuring clear visibility even in low-light conditions. The solar panel on top of the camera harnesses the power of the sun to charge the built-in battery, extending the working time of the camera.

Conclusion

The 7-inch Solar Magnetic Backup Camera System is a game-changer when it comes to vehicle safety and convenience. With its easy installation, solar-powered operation, and high-quality video feed, it offers a reliable solution for improving your driving experience. Say goodbye to blind spots and parking woes with this innovative backup camera system.

Back to blog

Leave a comment

Contact form